Remove A Hard Disk Drive Filler Panel - Sun Oracle SPARC T3-2 Service Manual

Note – The front and rear panel Service Action Required LEDs are also lit when the
system detects a hard disk drive fault.
Related Information
"Front Components" on page 1
■
"Rear Components" on page 3
■
"Remove a Hard Disk Drive" on page 86
■
"Install a Hard Disk Drive" on page 88
■
"Remove a Hard Disk Drive Filler Panel" on page 84
■
"Install a Hard Disk Drive Filler Panel" on page 90
■
"Verify Hard Disk Drive Functionality" on page 91
■

▼ Remove a Hard Disk Drive Filler Panel

This procedure can be performed by customers while the server is running. See
Service, Replaceable by Customer" on page 66
service procedures.
1. Attach an antistatic wrist strap.
2. On the hard disk drive filler panel you want to remove, complete the following
tasks.
84 SPARC T3-2 Server Service Manual • December 2013
for more information about hot
"Hot