Check For Faults Using The Show Faulty Command - Sun Oracle SPARC T3-2 Service Manual

▼ Check for Faults Using the show faulty
Command
Use the show faulty command to display information about faults and alerts
diagnosed by the system.
See "Fault Management Command Examples" on page 32
information the command displays for different types of faults.
●
At the -> prompt, enter the show faulty command.
-> show faulty
Target
--------------------+------------------------+-------------------------------
/SP/faultmgmt/0
/SP/faultmgmt/0/
faults/0
/SP/faultmgmt/0/
faults/0
/SP/faultmgmt/0/
faults/0
/SP/faultmgmt/0/
faults/0
/SP/faultmgmt/0/
faults/0
/SP/faultmgmt/0/
faults/0
/SP/faultmgmt/0/
faults/0
/SP/faultmgmt/0/
faults/0
/SP/faultmgmt/0/
faults/0
Related Information
"Diagnostics Process" on page 16
■
"Clear Faults With the clear_fault_action Property" on page 30
■
"Check for Faults With the fmadm faulty Command" on page 29
■
28 SPARC T3-2 Server Service Manual • December 2013
| Property
| fru
| class
|
| sunw-msg-id
|
| uuid
|
| timestamp
|
| fru_part_number
|
| fru_serial_number
|
| product_serial_number
|
| chassis_serial_number
|
| detector
|
| Value
| /SYS/PS0
| fault.chassis.power.volt-fail
|
| SPT-8000-LC
|
| ********-****-****-****-************
|
| 2010-08-11/14:54:23
|
| *******
|
| ******
|
| **********
|
| **********
|
| /SYS/PS0/VOLT_FAULT
|
for examples of the kind of