Sun Oracle SPARC T3-2 Service Manual page 198

5. Replace all hard disk drives and filler panels.
See
6. Replace the System Remind button assembly (air divider).
7. Replace the DVD drive.
See
8. Return the server to operation:
a. Install the top cover.
b. Return the server to the normal rack position.
c. Power on the server.
Note – The product serial number used for service entitlement and warranty
coverage might need to be reprogrammed on the disk backplane by authorized
service personnel with the correct product serial number located on the chassis EZ
label.
Related Information
"Remove the Hard Disk Drive Backplane" on page 183
■
"Install the Hard Disk Drive Backplane" on page 185
■
"Verify Hard Disk Drive Backplane Functionality" on page 187
■
186 SPARC T3-2 Server Service Manual • December 2013
"Install a Hard Disk Drive" on page
"Install a DVD Drive or Filler Panel" on page
See "Install the Top Cover" on page
See "Return the Server to the Normal Rack Position" on page
See "Returning the Server to Operation" on page
88.
141.
196.
195.
197.