Power Off The Server (Emergency Shutdown); Remove Power From The Server - Sun Oracle SPARC T3-2 Service Manual

▼ Power Off the Server (Emergency Shutdown)

Caution – All applications and files will be closed abruptly without saving changes.
File system corruption might occur.
●
Press and hold the Power button for five seconds.
Related Information
"Power Off the Server (Service Processor Command)" on page 69
■
"Power Off the Server (Power Button - Standby Mode)" on page 70
■
"Front Components" on page 1
■

▼ Remove Power From the Server

Remove the power cords from the server only after powering of the server.
●
Unplug all power cords from the server.
Caution – Because 3.3v standby power is always present in the system, you must
unplug the power cords before accessing any cold-serviceable components.
Related Information
"Power Off the Server (Service Processor Command)" on page 69
■
"Power Off the Server (Power Button - Standby Mode)" on page 70
■
"Power Off the Server (Emergency Shutdown)" on page 71
■
"Rear Components" on page 3
■
Related Information
"Safety Information" on page 62
■
Preparing for Service 71