Sun Oracle SPARC T3-2 Service Manual page 48

TABLE:
ILOM Command
start /SYS
reset /SYS
reset /SP
set /SYS keyswitch_state=value
normal | standby | diag | locked
set /SYS/LOCATE value=value
[Fast_blink | Off]
show faulty
show /SYS keyswitch_state
show /SYS/LOCATE
show /SP/logs/event/list
show /HOST
show /SYS
Related Information
"Managing Components With Automatic System Recovery Commands" on
■
page 54
36 SPARC T3-2 Server Service Manual • December 2013
Service-Related ILOM Commands (Continued)
Description
Powers on the host server.
Generates a hardware reset on the host
server.
Reboots the service processor.
Sets the virtual keyswitch.
Turns the Locator LED on the server on or
off.
Displays current system faults. See
for Faults Using the show faulty Command"
on page 28.
Displays the status of the virtual keyswitch.
Displays the current state of the Locator LED
as either fast blink or off.
Displays the history of all events logged in
the service processor event log.
Displays firmware versions and HOST status.
Displays product information, including the
part number and serial number.
"Check