Sun Oracle SPARC T3-2 Service Manual page 172

c. Plug the fan board cable and power cable into the connectors on the
d. Tighten the three captive screws to hold the front memory riser guide in
4. Reinstall all fan modules.
See
5. Reinstall all memory risers.
See
6. Return the server to operation:
a. Install the top cover.
b. Return the server to the normal rack position.
c. Reinstall the power cords to the power supplies and power on the server.
Note – The product serial number used for service entitlement and warranty
coverage might need to be reprogrammed on the fan board by authorized service
personnel with the correct product serial number located on the chassis EZ label.
Related Information
"Remove the Fan Board" on page 157
■
"Verify Fan Board Functionality" on page 161
■
160 SPARC T3-2 Server Service Manual • December 2013
motherboard and secure the fan board by reinserting and tightening the two
screws on each side of the outside of the chassis.
place.
"Remove a Fan Module" on page
"Install a Memory Riser" on page
See "Install the Top Cover" on page
See "Return the Server to the Normal Rack Position" on page
See "Returning the Server to Operation" on page
96.
121.
196.
195.
197.