Sun Oracle SPARC T3-2 Service Manual page 139

6. Push the DIMM into the connector until the ejector tabs lock the DIMM in
place.
If the DIMM does not easily seat into the connector, check the DIMM's orientation.
7. Repeat Step 2 through
8. Finish the installation procedure:
Install the memory risers.
■
See "Install a Memory Riser" on page
Return the server to operation.
■
See "Returning the Server to Operation" on page 193
Verify DIMM functionality.
■
See "Verify DIMM Functionality" on page 130
Related Information
"Memory Fault Handling" on page 23
■
"About DIMMs" on page 112
■
"Remove a DIMM" on page 122
■
"Install a DIMM" on page 124
■
"Verify DIMM Functionality" on page 130
■
"DIMM Configuration Error Messages" on page 132
■
Step 5 until all DIMMs are installed.
121.
Servicing Memory Risers and DIMMs 127