Verify Hard Disk Drive Backplane Functionality - Sun Oracle SPARC T3-2 Service Manual

▼ Verify Hard Disk Drive Backplane
Functionality
1. Run the ILOM show faulty command to verify that the fault has been cleared.
See "Managing Faults With ILOM" on page 22
show faulty command.
2. Perform one of the following tasks based on your verification results:
If the previous steps did not clear the fault, see
■
Faults" on page 15
diagnose component faults.
If the previous steps indicate that no faults have been detected, then the
■
component has been replaced successfully. No further action is required.
for information about the tools and methods you can use to
Servicing the Hard Disk Drive Backplane
for more information on using the
"Detecting and Managing
187