Tools Needed For Service
The following tools should be available for most service operations:
Antistatic wrist strap
■
Antistatic mat
■
No. 2 Phillips screwdriver
■
No. 1 flat-blade screwdriver (battery removal)
■
Pen or pencil (to power on server)
■
Related Information
"Safety Information" on page 62
■
▼ Find the Chassis Serial Number
If you require technical support for your system, you will be asked to provide the
server's chassis serial number. You can find the chassis serial number on a sticker
located on the front of the server and on another sticker on the side of the server.
If it is not convenient to read either sticker, you can run the ILOM show /SYS
command to obtain the chassis serial number.
●
Type show /SYS at the ILOM prompt.
-> show /SYS
/SYS
...
64
SPARC T3-2 Server Service Manual • December 2013
Targets:
MB
MB_ENV
USBBD
RIO
PDB
FANBD
Properties:
type = Host System
keyswitch_state = Normal
product_name = SPARC T3-2
Need help?
Do you have a question about the SPARC T3-2 and is the answer not in the manual?
Questions and answers