Return The Server To The Normal Rack Position - Sun Oracle SPARC T3-2 Service Manual

▼ Return the Server to the Normal Rack
Position
Caution – The chassis is heavy. To avoid personal injury, use two people to lift it
and set it in the rack.
1. Release the slide rails from the fully extended position by pushing the release
tabs on the side of each rail.
2. While pushing on the release tabs, slowly push the server into the rack.
Ensure that the cables do not get in the way.
3. Reconnect the cables to the back of the server.
If the cable management arm (CMA) is in the way, disconnect the left CMA release
and swing the CMA open.
4. Reconnect the CMA.
Swing the CMA closed and latch it to the left rack rail.
Returning the Server to Operation 197