Cold Service, Replaceable By Customer; Cold Service, Replaceable By Authorized Service Personnel - Sun Oracle SPARC T3-2 Service Manual

Cold Service, Replaceable by Customer

The following table identifies the components that require the server to be powered
down. These components can be replaced by customers.
Component
DIMMs
DVD drive/filler
System battery
I/O cards (PCIe2/XAUI)/filler
Cold service procedures require that you shut the server down and unplug the
power cables that connect the power supplies to the power source.
Cold Service, Replaceable by Authorized Service
Personnel
The following table identifies components that must be replaced by authorized
service personnel. These replacement procedures can only be done when the server is
powered down and power cables are unplugged.
Component
Fan board
Motherboard
Disk drive backplane
Power supply backplane
See "Cold Service, Replaceable by Customer" on page 67
shutting down the server.
Service information
"Servicing Memory Risers and
DIMMs" on page 109
"Servicing DVD Drives" on page 139
"Servicing the System Lithium
Battery" on page 143
"Servicing Expansion (PCIe) Cards"
on page 147
Service information
"Servicing the Fan Board" on page 157
"Servicing the Motherboard" on
page 163
"Servicing the Hard Disk Drive
Backplane" on page 183
"Servicing the Power Supply
Backplane" on page 189
Notes
Remove any media prior to
replacement
Must be installed to preserve
proper interior air flow
Notes
Transfer system configuration
PROM to new motherboard.
for the steps involved in
Preparing for Service 67