Sun Oracle SPARC T3-2 Service Manual page 180

8. Reinstall the cable cover.
9. Reconnect all cables from the power supply backplane, hard disk drive
backplane, and fan board to their original locations on the motherboard.
10. Reinstall all PCIe cards.
See
11. Tighten the captive screw in the corner near the fans that secures the
motherboard to the chassis.
12. On the replacement motherboard, install the System Configuration PROM that
you removed from the old motherboard.
13. Install the top cover.
See
14. Return the server to the normal rack position.
See
15. Reinstall the power cords to the power supplies.
See
168 SPARC T3-2 Server Service Manual • December 2013
"Install a PCIe Card" on page
"Install the Top Cover" on page
"Return the Server to the Normal Rack Position" on page
"Connect Power Cords to the Server" on page
151.
196.
198.
197.