Programming A Library; Overwriting A Library - Compulite Sabre User Manual

Programming a Library

You can use the NSKs or the editor keypad.
Example: Program Position library 6.
Keypresses
1. Select spots
2. Position the beam.
3. Press [ASSIGN]
4. Press [POSITION]
5. Press NSK 06
Or
Keypresses
1. Select spots
2. Position the beam.
3. Press [=]
4. Press [POSITION]
5. Enter a number on the
keypad.
Program Color or Gobo libraries using the same procedure. Instead of pressing
[POSITION], select [GOBO] or [COLOR].

Overwriting a Library

If a library exits the warning Library Exists is displayed. You can overwrite the library.
Keypresses
Press the same NSK again to
update the library.
Programming a Library
Results/Comments
Enter the spot number/s you want to include in
the library.
Use the trackball, wheels, or the numeric
keypad to assign the x/y values. Repeat the
procedure for as many spots as desired.
Skip this step if the NSK mode is Position.
The group in the editor is now named position
library 6. Position 6 appears in the command
line. The LED on the selected NSK lights.
Library P-06 Stored is displayed.
Results/Comments
Enter the spot number/s you want to include in
the library.
Use the trackball, wheels, or the numeric
keypad to assign the x/y values. Repeat the
procedure for as many spots as desired.
The group in the editor is now named position
library 6. Pos # appears in the command line. .
The LED on the selected NSK lights. Library #
Stored is displayed.
Results/Comments
The message Library # Stored is displayed.
9-3
Sabre