Compulite Sabre User Manual page 341

27-14 Mix Output Menu
position in the Spot Patch menu the iris of the selected spot will be fully opened and the
dimmer on at 100%.
Clear 1/Clear 2
Color parameters are usually assigned to Clear 1. Gobo parameters are usually assigned to
Clear 2.
Assigning parameters to wheels
When defining a new device, you can assign parameters to the wheels during the
definition process.
4 parameters can be assigned to each wheel. When assigning parameters to wheels, you
should plan the wheel bank assignments (see below). Parameter to wheel bank
assignments should be done when all of the parameters to wheels assignments are
complete.
A parameter can be assigned to more than 1 parameter key. The procedure described
below can be carried out before going on to the next parameter or when you have finished
defining all of the parameters.
To assign a parameter to a wheel, the cursor must be on the parameter name.
Dimmer and x are automatically assigned to the dimmer wheel. P1 and y are automatically
assigned to the iris wheel.
Keypresses
1. After completing the
definition of a parameter,
return the cursor to the
parameter name.
2. Press the parameter key
associated with the wheel
you want to use.
3. Press F1 Store
Cancelling a wheel assignment
Example: Cancel the wheel assignment for the gb parameter.
Keypresses
1. Go to the Mix Output menu.
2. Press F2 Select Device
3. Press F5 Define Device
4. Place the cursor on the gb
5. Press ERASE
6. Press the parameter key for
gb
7. Press F1 Store
Sabre
Results/Comments
The parameter name appears on the LED
display.
Results/Comments
The parameter disappears from the LCD
display.