Adding Follower Spots Using The Numeric Keypad; Adding Follower Spots Using The Nsks - Compulite Sabre User Manual

Assigning leader/follower spots using the numeric soft keys
You must assign a leader spot before assigning follower spots. If you attempt to assign
follower spots before assigning a leader spot, the message DEFINE LEADER FIRST! is
displayed.
It is recommended to assign leader and follower spots while viewing the NSK Exam Display;
press [51-100] [EXAM].
Assigning a Leader spot
Example: Assign spot 10 as the leader spot for followers 1 - 8. Remember only spots that have
been set up in the Leader menu can participate in the Leader function.
Keypresses
1. Press [LEADER/FOLLOW]
2. Press NSK 10
3. Press [LEADER/FOLLOW]
twice.
4. Select spots 1 - 8 by pressing
(NSK) 01 → (NSK) 08

Adding follower spots using the numeric keypad

Example: Add spot 12 as follower spots
Keypresses
1. Select spot 12.
2. Press [LEADER]
3. Press [STORE]

Adding follower spots using the NSKs

Keypresses
1. Press [LEADER/FOLLOW]
2. Press NSK 12
Adding follower spots using the numeric keypad 25-5
Results/Comments
Skip this step if the Numeric Soft key mode is
Leader.
Spot 10 is highlighted in light red and is labeled
LEADER. The Leader function is automatically
enabled.
The NSK mode is now Follow.
The Follower spots are highlighted in dark red.
Results/Comments
More than one spot may be added at one time.
The display now shows the leader table. The
prompt
lead by: appears in the command line. Ignore the
prompt.
The display returns to Stage Display.
Results/Comments
The LED on the key blinks and the alphanumeric
display shows Leader as the current NSK mode.
Spot 12 is now highlighted in dark red on the NSK
Exam display.