26-6
Configuring in Service Tools
Bit Function
E
Printer Type
F
System console
G
VC Compression
H
Multi cues
I
USA system
J
Spare
K
Internal MIDI
L
Compact backup
M
URC Layout
N
Spare
O
SMPTE
Sabre
Toggles
Description
Toggle to 1 to use the B and D faders as
crossfaders, thus making A/B and C/D
split crossfaders.
0 - Alphanumeric
Use the setting that suits your printer.
1 - Graphics
0 – Main
1 – Backup
0 – Disable
Toggle to 0 if you are using Ethernet and a
1 - Enable
CAD program, such as WYSIWYG, that is
not CompuCAD.
Toggle to 1 if you are using the Ethernet
and CompuCAD.
0 - Disable
This permits or disallows assignment of a
1 - Enable
single memory to more than one playback
source at a time.
0 - No
USA system "no" requires these key
1 - Yes
sequences:
CHAN # @ 7
CHAN # @ 8•5 = # STORE - a decimal
point is required for the intensity
assignment.
USA system "yes" permits these key
sequences:
CHAN # @ 70
CHAN # @ 85 MEM # STORE - no
decimal point is required for the intensity
assignment. = is dropped from the memory
recording sequence.
0 - No
Bits A and K must be toggled to 1 to
1 - Yes
enable using MIDI.
0 - Yes
Set to 1 if the system is being used as a
1 - No
back up console.
0 – Old
The Old panel layout refers to the panel
1 - New
layout of the original Remote Control Unit
that worked with Animator.
New refers to the new product Universal
Remote Control.
0 - No
Toggle to 0 when not using SMPTE.
1 - Yes
Toggle to 1 to enable SMPTE.
Sabre cannot be configured for SMPTE
using an outboard generator and DMX
Input at the same time.