Compulite Sabre User Manual page 338

Defining discrete step parameters
Keypresses
1. Follow steps 1 - 5 from the
instructions above.
2. Enter the parameter name
and channel under Hi/Lo.
3. Use the arrow keys and
position the cursor under Stp.
4. Enter the number of steps
5. Press +
6. Press ↵
7. Enter the value of each step
in a range of 1-255 or
percentage
8. Press F1 Store
This procedure may be modified at every level without repeating the entire procedure.
Simply place the cursor at the required step and modify.
To convert a discrete or mixed step to continuous, type 0 (zero) in Stp column.
Defining mixed step parameters
Keypresses
1. Follow steps 1 - 5 from the
instructions above.
2. Enter the parameter name
and channel under Hi/Lo.
3. Use the arrow keys and
position the cursor under Stp.
4. Enter the number of steps
5. Press ↵
6. Enter the value of each step
in a range of 1-255 or
percentage
7. Press F1 Store
Mix Output Menu
Results/Comments
A window containing the Step Definition is
displayed in gray.
Consult the manufacturer's specifications to
determine how many steps to assign. The
number appears in the Stp column
The number of steps followed by a "d" is
displayed in the Stp column. The Step
Definition Window is now active and displayed
in red.
Step values may be entered in bits or
percentage. Use the spacebar on the
alphanumeric keyboard or the decimal point
or F5 on the console to toggle between
absolute and percentage definition.
Clear the window by moving the cursor to
another parameter.
Results/Comments
A window containing the Step Definition is
displayed in gray.
Consult the manufacturer's specifications to
determine how many steps to assign.
The number of steps followed by a "m" is
displayed in the Stp column. The Step
Definition Window is now red and active.
Step values may be entered in bits or
percentage. The spacebar on the
alphanumeric, the decimal point, or F5 toggle
between absolute and percentage.
Clear the window by moving the cursor to
another parameter.
27-11
Sabre