Loading Show Files; Selecting A Show File From The Hard Disk - Compulite Sabre User Manual

Loading show files

The Load menu, menu 2, manages loading show files stored on the hard disk or floppy
disk.
If there are memories on board (assigned to playback devices) while loading, the memory
numbers that are identical to the memories already on board do NOT load.

Selecting a show file from the hard disk

When entering the Load menu, the active directory is the last selected directory. If this
directory does not contain the show that you want to load you must change directories.
Keypresses
1. Enter the Load menu.
2. Press F3 Change Dir
3. Press F4 Return to Root
4. Press F3 Change Dir
5. Use the arrow keys and
select the directory.
6. Press Enter
7. Press F5 Remain Here
8. Press F1 Play/Act.
9. Enter the show file number
that you want to load.
10. Press F1 All
11. Press F1 Yes
Loading show files
Results/Comments
Skip this step if the directory you want is
displayed.
The root directory is displayed.
Skip this step if the directory you want is
displayed.
see Load options, page 11-14
While the system is loading a dynamic display
is shown in the upper right corner of the
screen.
After loading is complete the Q List Exam is
displayed.
If you have made an error in entering the play
number, the message
Bad Play Number appears. Start again and
enter the correct play number.
11-13
Sabre