Table of Contents
Advertisement
Communication params
Communication Parameters (F1) identifies different consoles that are linked in an
Ethernet network configuration. Enter the IP address for the console here.
The Communication Parameters information is stored in non-volatile memory and is
retained in the console until modified.
Use the arrow keys on the console or the alphanumeric keyboard to move from field to
field. You can also use F2 Next.
Keypresses
1. Turn off the power.
2. Press and hold down [CE]
and [CLEAR]
3. Turn the power back on.
4. After a few seconds, release
the keys.
5. Press F3 Config System
6. Enter the password.
7. Press F1 Communication
Params
8. Enter the I.P. number.
9. Enter a text label for the
console.
10. Enter the console's ID
number
11. Press F6 Enter & Exit
12. Press F6 Store
Toggling CRT number
You can configure the console for 1, 2, or 3 monitors.
Keypresses
1. Go to Service Tools.
2. Press F2 Toggle CRT until
the desired number of
monitors is displayed.
3. Press F6 Enter & Exit
Configuring in Service Tools
Results/Comments
After running some self-tests, the Service
Tools main menu is displayed.
The different components of the system
configuration are displayed.
A window opens showing the I.P. address,
textual description, and console's ID number.
Return to the main System Configuration
menu. Sabre prompts for a confirmation.
All information entered under Communication
parameters is stored.
Results/Comments
The system prompts to store.
26-3
Sabre
Advertisement
Table of Contents
