Editing Libraries; Updating A Library; Adding Spots To A Library - Compulite Sabre User Manual

Editing Libraries

There are two methods to update libraries. The entire library can be called into the editor
and its contents modified.
Libraries can also be updated during the STORE STORE function. (See Chapter 9
Modifying Memories)
When moving your show from venue to venue, libraries can be updated using the Change
Venue function. See Chapter 22 Leader for details.
In the examples below, Gobo library 6 is updated.

Updating a Library

Example: Update Gobo library 6.
Keypresses
1. Press [GOBO]
2. Press NSK 06
3. Press [SPOT]
4. Modify the parameters in this
library.
5. Press [STORE]

Adding spots to a Library

Example: Add spots to Gobo library 6.
Keypresses
1. Select spots.
2. Modify the gobo parameters.
3. Press [ASSIGN]
4. Press NSK 06
5. Press [STORE]
6. Press [STORE]
Editing Libraries
Results/Comments
Skip this step if the NSK mode is Gobo
All the spots in the library appear in the editor.
The message Library # Stored is displayed.
Results/Comments
A group or a range of spots may be selected.
Updates the information in the library with the
editor contents. If the modified spot/s are
already present in the library, the message
Library # Exists. Update?
The message Library # Stored is displayed.
9-7
Sabre