Compulite Sabre User Manual page 191

Adding a channel to an assignment
You can add a channel to a group assignment.
Example: add channel 10 to the previous assignment.
Keypresses
1. Select channel 10.
2. Assign intensity.
3. Press [ASSIGN]
4. Press [Q-KEY]
5. Press NSK 10
Assigning a range of spots
A range of spots, a group of spots, or single spots can be assigned to Q-Keys.
Example: Assign spots 8 - 10 to Q-Key 12
Keypresses
1. Select spots 8 - 10.
2. Assign parameter values.
3. Press [ASSIGN]
4. Press [Q-KEY]
5. Press NSK 12
Assigning a range of channels
A range of channels, a group of channels, or single channels can be assigned to Q-Keys.
Example: Assign channels 8 - 10 to Q-Key 12
Keypresses
1. Select channels 8 - 10.
2. Assign intensity.
3. Press [ASSIGN]
4. Press [Q-KEY]
5. Press NSK 12
Assignments to Q-Keys
Results/Comments
The message Dim/XF Key Expected is
displayed.
Skip this step if the NSK mode is Q-Key.
Channel 10 is added to the assignment.
Results/Comments
The message Dim/XF Key Expected is
displayed.
Skip this step if the NSK mode is Q-Key.
The key's LED lights indicating that an
assignment is present.
Results/Comments
The message Dim/XF Key Expected is
displayed.
Skip this step if the NSK mode is Q-Key.
The key's LED lights indicating that an
assignment is present.
14-5
Sabre