24-2
Overview
Overview
Events are a collection of assignments to playback devices and playback commands that
can be triggered by SMPTE time code assignments, operated in the editor, or assigned to
memories. An Event assigned to a memory operates automatically when the memory
sequences on the A/B crossfader.
[AUTO ASSIGN] must be active (LED on) to operate Events assigned to memories.
Events include assignments and playback commands to A/B, C/D, Controllers,
Submasters, and the Joystick. Events can operate Macros.
Events are preprogrammed in the Event menu, menu 21.
Changing the Q-List
You can change the default Q-List from the Event menu.
Keypresses
1. Press F4 Change Q-List
2. Enter the new default Q-List
number.
3. Press F1 Enter
Events for crossfaders
Keypresses
1. Go to the Event menu.
2. Enter an Event number at the
prompt.
3. Press F1 A/B
4. Press F1 QList # (optional)
5. Enter a QList number at the
prompt
6. Press F2 Memory #
7. Enter a memory number.
8. Press F3 Man or F4 Go.
Sabre
Results/Comments
Sabre prompts for a Q-List number.
The default Q-List is displayed under the
Event List.
Results/Comments
The Q-List Exam is displayed.
If you do not specify a QList the memory
assignment is taken from the default QList.
The Memory List is displayed.
The Event is displayed in the Event List.