12-4
Assigning Memories
Fade to the assignment in recorded fade time:
Keypresses
1. Select a memory.
2. Press [TIME]
3. Press [GO TO]
4. Press [SEQ] to enable
automatic sequencing.
Press [AUTO ASSIGN] for
automatic Event operation.
Fade to the assignment in selected fade time:
Example: Assign and fade to memory 1 in 8 seconds.
Keypresses
1. Select memory 1.
2. Press [TIME]
3. Press 8 on the keypad.
4. Press [GO TO]
5. Press [SEQ] to enable
automatic sequencing.
Press [AUTO ASSIGN] for
automatic Event operation.
Sabre
Results/Comments
The fade times for the selected memory are
displayed in the command line.
The selected memory is assigned to the active
fader and is faded up in assigned fade time.
Results/Comments
The fade times for the selected memory are
displayed in the command line.
The selection replaces the fade times displayed in
the command line.
The selected memory is assigned to the active
fader, fading in 8 seconds.