Table of Contents
Advertisement
9-8
Erasing a Library
Removing spots from a Library
Example: Remove spot 3 from position library 6.
Keypresses
1. Press [POSITION]
2. Press NSK 06
3. Select spot 3
4. Press [RELEASE]
5. Press [STORE]
Updating a library via the STORE STORE function
After pressing [STORE], a window opens in the middle of the screen showing which
potentiometers are affected by confirming the store. At the bottom of this window the F
key options are displayed. Among these options are library updates may appear, if the spot
that you have modified has a library assignment.
Example: Memory 2 is on A, the active crossfader. The memory contains spots 3 - 6 with
position library 3. You modify the position of spots 3 - 6.
Keypresses
1. Select spots 3 - 6.
2. Modify their position.
3. Press [STORE]
4. Press [F2 POS]
5. Press [STORE]
Erasing a Library
Position, Color, and Gobo libraries are all erased using the same procedure. Use the NSKs
or the keypad.
Example: Erase Gobo library 09.
Keypresses
1. Press [FREE]
2. Press [GOBO]
3. Press NSK 09
4. Press NSK 09 again
Sabre
Results/Comments
Skip this step if the NSK mode is Position.
The library number appears in the command line.
All of the spots in the library enter the editor.
More than one spot can be selected.
Spot 3 is released from the editor.
The message Library # Stored is displayed.
Results/Comments
The STORE STORE window is displayed.
The modifications are stored to memory 2 and
position library 3 is updated.
Results/Comments
Skip this step if the NSK default mode is
Gobo.
Skip this step if NSK mode is Gobo.
The system asks: Are You Sure?
Confirm the command. The message: Library
G-09 Erased is displayed.
Advertisement
Table of Contents
