Adding operations to an Event
If you are adding an operation to an existing Event, a warning is displayed and you must
press your selection a second time to confirm.
Example: Event 6 is an assignment on A/B. You want to add macro operation to Event 6.
Keypresses
1. Go to the Event menu.
2. Select Event 6
3. Press F5 Macro
4. Press F5 Macro again
Adding text to an Event
Text can be added to existing Events in the Event menu and in the editor.
The text option in the Event menu is found on the third page.
Keypresses
1. Select the Event number.
2. Press F1 Text
3. Type the text on the
alphanumeric keyboard.
4. Press F1 Store
Or
Keypresses
1. Press [EVENT] and enter the Event number.
2. Press [TEXT]
3. Type the text on the alphanumeric keyboard.
4. Press [STORE]
Sabre
Adding operations to an Event
Results/Comments
The warning Event Exists is displayed.
Results/Comments
If the Text option is not available, press F6
until it is displayed.
The text is displayed with the Event.
24-13