Table of Contents
Advertisement
28-8
Channel Patch
Enabling General Master control
Dimmers that were removed from General master control can be re-instated.
Keypresses
1. If necessary, press [@] to
toggle the connector.
2. Press F5 Curve & G.M.
3. Enter the dimmer number
4. Press F4 Enable G.M.
Viewing free dimmers
This function displays the free or unused dimmers.
The color code key for this display is:
Color
Blue on a gray field
Black on a white field
Black on a yellow field
Testing channels and dimmers
You can test channels or individual dimmers. When testing dimmers any channel
patching is ignored. .
Keypresses
1. Press F6 More and then F3
Test
2. If necessary, press [@] to
toggle the connector.
3. Press F1 Channel to test
channels.
Press F2 Dimmers to test
dimmers.
4. Enter the channel or dimmer
number and press [FULL] or
assign intensity using the
dimmer wheel.
5. Go to the next or previous
channel or dimmer by
pressing F1 Previous or [-]
and F2 Next or [+].
Sabre
Results/Comments
The system prompts for the dimmer number.
More than one dimmer can be selected at this
time.
The selected dimmer/s are displayed in black.
Status
Cleared dimmer assignments
Dimmers assigned to scrollers and channels that are used in
memories
Free (unused dimmers)
Results/Comments
The channels/dimmers are displayed. You are
prompted for a channel or dimmer number.
The previously selected intensity is assigned
to the new channel/dimmer selection.
Advertisement
Table of Contents
