Compulite Sabre User Manual page 347

27-20 Mix Output Menu
Copying to the User Pool
Keypresses
1. Press F4 Device Pool
2. Press F1 Get From System
Pool
3. use the arrow keys to select
device
4. Press F5 Put In User Pool
The User Device Pool
Copying a device from the device list to the User Pool
If you have defined a new device or modified the default definition of a device, you should
store the new definition in the User Pool.
Device definitions stored in the User Pool are still available after warm start. If you do not
store new or modified definitions in the User Pool, this information is not recorded with
the show file and is, therefore lost after cold start.
Keypresses
1. Press F4 Device Pool
2. Use the arrow keys to select
a device
3. Press F4 Put In User Pool
Copying a device from the User Pool to the device list
Keypresses
1. Press F4 Device Pool
2. Use the arrow keys to select
device from the device list.
3. Press F1 Get From User
Pool
4. Use the arrow keys to select
the desired device, from the
User Pool.
5. Press F1 Put In Device List
Sabre
Results/Comments
If the system pool is not displayed, press [UP
1] or [DOWN 1].
The device pool is active (red field).
The device highlighted in the System Pool is
added to the user pool.
Results/Comments
If the system pool is not displayed, press [UP
1] or [DOWN 1].
From the Device List, select the device that
you want to store in the User Pool.
The device is added to the User Pool.
Record to diskette to store the user pool for
future use.
Results/Comments
If the system pool is not displayed, press [UP
1] or [DOWN 1].
The device from the User Pool replaces the
selected device. If there are 'Spares' in the
Device List the User Pool device will occupy
the first spare space.
The User Pool is now active, displayed on a
red field.
The device from the User Pool will replace
the highlighted device in the Device List.