Dividing A Memory Into Parts; Adding A Part To A Memory - Compulite Sabre User Manual

Dividing a Memory into Parts

Memories can be divided into Parts after they have been programmed.
Keypresses
1. Select memory 1
2. Select channels 1
3. Press [PART] [1]
4. Press [TIME] [3]
5. Press [WAIT] [2]
6. Select channel 4
7. Press [PART] [2]
8. Press [WAIT] [8]
9. Continue programming Parts
10. Press [STORE]

Adding a Part to a Memory

In the example below, Part 3 consisting of parameter 2 spot 5 is added to the last recorded
memory.
Keypresses
1. Select spot 5.
2. Select parameter 2.
3. Assign a value to parameter
2.
4. Press [MEMORY]
5. Press [PART] [3]
6. Assign a fade time.
7. Press [STORE]
Results/Comments
Æ
5. The memory is now active on stage. The
modification may be done in blind mode.
The intensity assignments of the selected
channels are displayed in green.
The intensity assignment of the selected channel
is displayed in gray.
Memory 1 is stored with its Part assignments.
Results/Comments
If no memory number is entered, the Part is
added to the last recorded memory. To add this
Part to another memory, enter a memory number
at this point.
Assign a Part number.
Dividing a Memory into Parts 21-5
Sabre