Events For Controllers; Assigning Q-Lists - Compulite Sabre User Manual

24-4

Events for controllers

Events for controllers
There are two pages for Events on controllers.
F1 QList # F2 Mem #
F1 Sleep F2 Hard
F1 QList # Assign entire Q-Lists or arrange of memories from a Q-List. The
assignment can include a Go command.
F2 Mem # Assign a memory or a range of memories (chaser) in Hard or Soft mode.
The assignment can include a Go command.
F3 Group Assign Groups to controllers in XF or Dim mode.
F4 Go Give a Go command to a controller.
F5 Hold Give a Hold command to a controller.
F6 F1 Sleep Stop and release a chaser. The released parameters, channels, scrollers
bump to tracking.
F6 F2 Hard Change the chaser assignment to Hard mode.
F6 F3 Soft Change the chaser assignment to Soft mode.
F4 XF Change the assignment mode or black out controller output.
F5 Dim Change the assignment mode or black out controller output.

Assigning Q-Lists

Keypresses
1. Go to the Event menu.
2. Enter an Event number at the
prompt.
3. Press F3 Cntrlrs
4. Enter a controller number at the
prompt.
5. Press F1 QList #
6. Enter a QList number at the
prompt
7. Press F1 Memory #
8. Enter a memory number at the
prompt.
9. Press F4 X-fade or F5 Dim
Sabre
F3 Group # F4 Go
F3 Soft F4 XF
Results/Comments
The Q-List Exam is displayed.
If you do not specify a QList the memory
assignment is understood to be from the
default QList.
The Memory List is displayed.
The Event is displayed in the Event List.
F5 Hold F6 More
F5 Dim F6 More