Compulite Sabre User Manual page 381

Relative modification
Example 1: Modify the time codes for memories 1 – 5 by adding 40 seconds to the time
assignments.
Keypresses
1. Select the memory range -
Æ Æ
[MEMORY 1 5]
2. Press [SMPTE]
3. Press [+]
4. Press [•] [40]
5. Press [STORE]
Example 2: Modify the time codes for memories 1 – 5 by adding 1 hour to the time codes
for each memory.
Keypresses
1. Select the memory range -
Æ Æ
[MEMORY 1 5]
2. Press [SMPTE]
3. Press [+]
4. Press [1] [•] [•]
5. Press [STORE]
The results of the examples above are illustrated in the following table.
Memory Time In
1 4
2 4
3 4
4 4
5 4
Manually Assigning SMPTE Time
Results/Comments
The time assignment for the first memory in
the range is displayed in the command line.
Results/Comments
The time assignment for the first memory in
the range is displayed in the command line.
1:: is displayed in the command line.
The SMPTE assignments are updated
relatively.
Original SMPTE Modified SMPTE assignment
assignment
Example 1
01:00:04.00 00:00:44.00
01:00:08.00 00:00:48.00
01:00:12.00 00:00:52.00
01:00:16.00 00:00:56.00
01:00:20.00 00:01:00.00
30-11
Example 2
02:00:04.00
02:00:08.00
02:00:12.00
02:00:16.00
02:00:20.00
Sabre