Modifying Palettes; Adding A Channel - Compulite Sabre User Manual

Modifying Palettes

There are 2 ways to modify palettes.
You can modify a Palette by adding the editor to the Palette. This method begins with
selecting the spots, parameters, channels, or scrollers and adding them to the Palette. If the
Palette does not contain the channel, scroller, or spot type it is added. If the Palette does
contain the channel, scroller or spot type the Palette information is overwritten.
You can also use direct Palette modification, which begins by selecting the Palette.

Adding a channel

Example: Add a channel to Palette 10.
Keypresses
1. Select the channel and assign
intensity.
2. Press [PALETTE]
3. Press [ASSIGN]
4. Press NSK [10]
5. Press NSK [10] again.
Or
Keypresses
1. Press [PALETTE]
2. Press [NSK 10]
3. Press [CHANNEL]
4. Enter the channel number on the
keypad and assign intensity.
5. Press [STORE]
Modifying Palettes
Results/Comments
Update Palette Info? is displayed.
Palette # Stored is displayed.
Results/Comments
Skip this step if the NSK mode is Palette
The contents of the Palette enter the
editor.
Palette # Stored is displayed.
18-5
Sabre