17-4
Modifying Groups
Modifying Groups
Adding spots and channels to Groups
Spots and channels can be easily added to existing Groups.
Example: Add spots 7-9 to Group 01.
Keypresses
1. Select spots 7 → 9
2. Press [ASSIGN]
3. Press [GROUP
4. Press 01
Removing spots/channels from Groups
Example: remove spots 7 → 9 from Group 01.
Keypresses
1. Select Spots 7 → 9
2. Press [FREE]
3. Press [GROUP]
4. Press 01
Erasing Groups
Delete Groups by freeing the assignment on the Numeric Soft Keys.
1. Press [FREE]
2. Press the NSK of the Group you want to delete.
To delete more than one Group, press and hold [FREE] or lock [FREE].
Sabre
Results/Comments
The command line reads: Assign .
Skip this step if the NSK mode is Group.
The selected channels and/or spots are
added to the existing Group.
Results/Comments
Skip this step if the NSK mode is Group.
The selected spots and/or channels are
removed from the Group.