L u n a a n d N o va Y o k e s
Operation
Programming the Yoke
Keypresses
2. Press MODE as many
times as necessary until
the feature is displayed
3. Use the arrow keys to
assign a value
4. Press STORE
5. Press STORE again
Note
Pressing any key at any time stops yoke travel and disrupts DMX communication
for 15 seconds. At the end of the 15 second period, DMX communication is
resumed. The display dims.
Doc. Version 1.01
Results/Comments
A single press advances the value by 1 unit or
toggles the assignment. A sustained press
advances quickly.
The display flashes.
The value is stored.
Compulite Systems (2000)
7