Creating Homogeneous Beam Movement; Patching Dimmers To Channels; Patching Scrollers To Channels - Compulite Sabre User Manual

4-4 Patching

Creating homogeneous beam movement

1. Go to the Spot Patch menu.
2. Press F1 Patch Position.
3. Select the spot you want to adjust.
4. Press F1 Convert To. The dimmer of the selected spot is turned on.
5. Select one of the movement options (1-8) by entering the number on the numeric
keypad. You can use the trackball to check your selection.
6. Press F1 Store Convert.
See Chapter 27 - Spot Management, for further information.

Patching dimmers to channels

1. Go to the Channel Patch menu.
2. Press F1 Assign Dimmer.
3. Enter a dimmer number in answer to the prompt.
4. Press F3 To Channel.
5. Enter a channel number in answer to the prompt.
6. Press F1 Store.
See Chapter 28 - Channel and Scroller Patching, for further information.

Patching scrollers to channels

The scroller to channel default patch is 1-to-1. This is easily changed in the Scroller Patch
menu.
1. Go to the Scroller Patch menu.
2. Select a scroller by entering the scroller number on the numeric keypad.
3. Press F2 To Channel.
4. Enter the channel number in answer to the prompt.
5. Press F1 Store.
See Chapter 28 - Channel and Scroller Patching, for further information.
Sabre