Compulite Sabre User Manual page 91

The keys used to assign fade times are:
[TIME] and [WAIT]
PRESS
[TIME]
[TIME] [TIME]
[WAIT]
[WAIT] [WAIT]
[WAIT] [WAIT] [WAIT]
TIME ASSIGNMENT
Time – in
When a go command is received, all the channels/spots
fading to a higher intensity begin their fade. The fade takes
place in the assigned time.
Time – out
When a go command is received, all the channels/spots
fading to a lower intensity begin their fade. The fade takes
place in the assigned time.
Delay
When looped memories (see Chapter 10 Loops and Links)
are assigned Delay times, the delay time determines how
long a memory stays on stage before the crossfade to the
next memory in the loop begins.
When Delay time is assigned to a single memory, it behaves
as a follow on memory. Example: memory 3 has a delay
time. When the crossfade to memory 2 is complete the
crossfade to memory 3 begins automatically.
Wait – in
When a go command is received, all the channels/spots
fading to a higher intensity begin to count the assigned wait
time before beginning their fade.
Wait – out
When a go command is received, all the channels/spots
fading to a lower intensity begin to count the assigned wait
time before beginning their fade.
Fade Times 7-13
Sabre