Table of Contents
Advertisement
LCD displays
The keys [DISPLAY CUE] and [DISPLAY TEXT] control the LCD display.
[DISPLAY TEXT] has 5 displays.
Access the displays with successive presses on the [DISPLAY TEXT] key.
Display 1
1st
Text of
row
incoming
memory
2nd
Incoming
row
memory
number
[DISPLAY CUE] has 4 displays.
Access the displays with successive presses on the [DISPLAY CUE] key.
Display 1
1st
Q-List #
row
2nd
Incoming memory
row
number
Assigning Memories
Single memories, a selected range of memories, and an open-ended range of memories can
be assigned to controllers.
If a memory is assigned to a controller and if anything (a spot, a spot parameter, or a
channel) is removed from or added to the controller assignment, the assignment becomes a
grp.
Assigning a single memory
Example: Assign memory 2 to controller 20 in x-fade assignment mode.
Keypresses
1. Select memory 2.
2. Press [ASSIGN]
3. Press controller 20's
[XF]
Display 2
Display 3
Fader level
Chase rate
Text of
Text of
incoming
incoming
memory
memory
Display 2
Fader level
Incoming memory
number
Results/Comments
The message Dim/Fade Key Expected is displayed.
The memory number assigned and the assignment appear
on the LCD display above the controller.
Assigning Memories
Display 4
Text of
incoming
memory
Text of
outgoing
memory
Display 3
Display 4
Chase rate
Incoming memory
number
Incoming memory
Outgoing memory
number
number
13-5
Display 5
Text of
current
memory
Sabre
Advertisement
Table of Contents
