Compulite Sabre User Manual page 413

B-4
Key
Bump Buttons
[ C ]
[ C ]
[CALL]
[CE]
[CHANNEL]
[CL1]
[CL2]
[CLEAR]
[COLOR]
[COPY]
[ D ]
[DELTA]
Sabre
What it does
Flashes the contents of the controller from its current level the to
the maximum level of the contents controller.
Assignment key for crossfader C. Assign memories, loops, or
groups of spots/channels.
Free assignment on C.
Switch to wheel bank C (Color). Wheel bank C usually contains
Color parameters.
Call the entire output of the board, including all playback
assignments and active controllers, to editor control for editing and
memory programming.
Clear the last numeric entry.
Set the keypad for channel selection. This key also acts as an "and"
key when used between channel selections.
Press twice to set the keypad to default to channel selection.
Channel appears in the command line on a gray field. The system
recognizes the first number selection as a channel without needing
to press this key.
Assign Home values to parameters included in CL1. The home
values are set in the Edit Init function under Define Device in the
Mix Output menu. Any parameters may be included in this Clear,
however it is most convenient to divide CL1 and CL2 between
colors and gobos. The default assignments for [CL1] are color
parameters.
Assign Home values to parameters included in CL2. The home
values are set in the Edit Init function under Define Device in the
Mix Output menu. The default assignments for [CL2] are gobo
parameters.
A regressive clear function, clearing the command line of the last
entry displayed and finally clearing the select spots and channels
from the editor.
Program, access, and erase Color Libraries on the Numeric Soft
Keys.
Copy parameter values from one spot to another using values
deriving from the editor, memories, or libraries.
Copy scroller frame assignments.
Copy channel intensity assignments.
Assignment key for crossfader D. Assign memories, loops, or
groups of spots/channels.
Free assignment on D.
A memory modification tracking function.