Table of Contents
Advertisement
Erasing a delta
You may want to erase an existing Delta in order to create a new Delta.
Keypresses
1. Press [DELTA]
2. Press [ERASE]
Releasing Channels, Spots, Scrollers
Use the following sequence to release channels and scrollers from 1 memory. If you want
to release channels and scrollers from a range of memories use the Memory Range
Modification functions.
Using the sequence below spots can be released from 1 memory or a range of memories.
Releasing spots
Keypresses
1. Select a single memory, a group of memories, or a range of memories.
2. Select the spot you want to release.
3. Press [RELEASE]
Releasing channels
Keypresses
1. Select a memory.
2. Select the channel you want to release.
3. Press [ZERO]
Use the dimmer wheel and wheel down to 0%
Press [RELEASE]
Releasing scrollers
Keypresses
1. Select a memory.
2. Select the scroller channel.
3. Press [FRAME]
4. Press [RELEASE]
Releasing Channels, Spots, Scrollers
Results/Comments
The red Delta flag in the command line is no
longer displayed.
8-11
Sabre
Advertisement
Table of Contents
