Basic Memory Modification - Compulite Sabre User Manual

8-2

Basic Memory Modification

Basic Memory Modification
Keypresses
1. Press [MEMORY] and select
a memory number on the
numeric keypad.
2. Press [SPOT] or
[CHANNEL]
3. Select spots or channels and
assign dimmer or parameter
values.
4. Press [STORE]
Warning!
If the memory that you are attempting to store is assigned to a playback
device, the message: Memory On Board is displayed. Press [STORE] again to overwrite
the memory. The editor clears.
¾ ¾
Note
You can go directly to memory modification from memory exam. .
Keypresses
1. Select a memory
2. Press [EXAM]
3. Press [CHANNEL] or [SPOT] The channels/spots are displayed in blue.
4. Continue from step 3 in the
previous example.
Sabre
Results/Comments
The memory is now live on stage and displayed in
white in the editor. Notice that the command line
reads: Memory # Spot or Channel .
The message Memory # Stored is displayed. The
spots or channels remain in the editor until
cleared.
Results/Comments
The contents of the memory are displayed.