Table of Contents
Advertisement
B-2
Key
[ →]
[ ↔ ]
[ + ]
[+STORE]
[ ]
[ = ]
[ • ]
[ @ ]
[ 1 ]
[ 2 ]
[51 – 100]
[ A ]
[ALL]
Sabre
What it does
Functions as a "through" key for range selections. There are two
identical keys on the panel; one located in the editor section and,
for convenience, one located near the Numeric Soft Keys.
Reverse the direction of the sequence running on the C/D faders.
Increments selected channel and/or spots, frames, memory, or
library by one.
Advances to the next selection in Exam mode.
Store the group in the editor as a memory, incrementing the
previously stored memory number by a predetermined increment.
The increment is adjustable in the System Parameters menu.
Decrements selected channel, spot, frame, memory, or library by
one.
Goes to the previous selection in Exam mode.
Put system in memory record mode. (If the system is defined as
USA (set NOVRAM bit I to 1) it is unnecessary to use this key for
memory recording.)
Used when renaming or exchanging memories.
Use for time assignments, memory numbers, and show file
numbers that are not whole numbers.
View the system status. When the editor is in idle press this key to
view the status of outboard devices such as remote control,
Submaster Wing, Macro Extension Keyboard.
Set the numeric keypad for intensity or parameter value
assignment.
An additional wheel bank for custom configuration. Parameters are
assigned to wheel banks in the Mix Output menu/Define device
option.
An additional wheel bank for custom configuration. Parameters are
assigned to wheel banks in the Mix Output menu/Define device
option.
Toggle the page of the Numeric Soft Keys.
Use with [EXAM] to display NSK status and contents.
Assignment key for crossfader A. Assign memories, loops, or
groups of spots/channels. Free assignment on A.
Enters all parameters of the selected spot/s to the editor.
Advertisement
Table of Contents
