Delay Assignments For Leader - Compulite Sabre User Manual

Changing the Leader using the NSKs
To change the leader assignment it is necessary to clear all of the leader/follower assignments.
Keypresses
1. Press [LEADER/FOLLOW]
2. Press NSK 04
3. Press [LEADER/FOLLOW]
twice.
4. Assign the follower spots by
pressing the relevant NSKs.

Delay assignments for Leader

Time assignments for leader influence the way in which the follower spots respond to the
movement of the leader spot.
Absolute Delay is a time delay. If the Follower spot is assigned a 1 second absolute delay,
when the Leader spot changes position the follower spot will go to the same position with a
delay of 1 second.
Relative delay is a spatial delay. It ensures that the same distance is kept between the spots at
all times. Relative delays are used with effects.
Assigning an absolute delay (time delay)
Keypresses
1. Select a spot or a range of
spots.
2. Press [TIME]
3. Enter a numerical value in
response to the prompt.
4. Press [STORE]
Delay assignments for Leader 25-7
Results/Comments
All of the follower assignments are cleared. Spot
4 is highlighted in light red and labeled LEADER
red on the NSK Exam display.
The NSK mode is Follow.
The follower spots are highlighted in dark red on
the NSK Exam display.
Results/Comments
If the current display was not the leader table, it is
now displayed. The prompt in the command line
reads: Spot # Abs. Delay:
The numerical value is a unit that is equal to 1/18
of a second.
The delay assignment appears next to the
follower spot number on the leader display.