Base - Compulite Sabre User Manual

20-6 Effect Attributes

Base

The Base is the parameter value reference for the starting point of the Effect. The
placement of the starting point is determined by Delta (see below).
Base is parameter and spot specific. The Base can be changed in the Effect Editor.
The default Base is the parameter value assigned before entering the Effect Editor. Base
values can be changed within the Effect Editor. Libraries can be also be for Base values.
When an Effect is stored as a memory, the Base is included. When an Effect is stored as an
Effect Palette the base is not retained.
Editing Base Values
Changing the Base value changes the starting point of the Effect.
You can change the Base in the Effect Editor or change the Base of an Effect running on a
playback device.
Editing the Base in the Effect Editor
Keypresses
1. Select spot/s and parameters.
2. Press [EFFECT]
3. Turn the Base wheel
Or
Press the Base key and enter
a value on the keypad
Or
Select a Library
Editing the Base for an Effect in playback
The following sequence is used when an Effect is running on a playback device.
Keypresses
1. Select a spot/s.
2. Press the parameter key and
move the parameter wheel or
assign a value on the keypad.
3. Press [STORE] [STORE]
Sabre
Results/Comments
The Effect Editor is displayed on the monitor
and the LCDs. The wheels control the Effects
attributes. The parameter keys are used to
select Effect Attributes.
The change is reflected on the monitor and the
LCD display.
Results/Comments
The P key's LED flashes.
The new value is displayed on the monitor.