Table of Contents
Advertisement
Key
[TEXT]
[TIME]
[TOPO]
[TRACK LIB]
[UP]
[UP 1]
[UP 2 ↑]
[WAIT]
[WINDOW]
[ X ]
[X LOCK]
[ Y ]
[Y LOCK]
[ZERO]
X-Y
What it does
Access the alphanumeric keyboard. Text labels may be attached to
Macros, memories, show files, Snaps, Libraries, Events, Groups,
effect Palettes, Display Macros, and Palettes.
Assign time in to the selected memory or part. Press twice to
access time out assignment.
Create a moving light map.
Used for display control on monitor 2, switching between a full
screen Topo display, a full screen channel display, and a spot
display with a reduced Topo map.
Track Library assignments in memories.
Page the Numeric Soft Keys.
Page from 1 to page 2, etc. on monitor 1.
Use with [SHIFT] to page on monitor 3.
Page from page 1 to page 2, etc. on monitor 2.
Use as an arrow key to move the cursor up in menus.
Assign delay time, wait-in time, and wait-out time to memories or
parts.
Move the window cursor. The location of this cursor shows which
window will change when using the paging keys.
Select the X parameter. When active (LED on) the left vertical
wheel controls Pan.
Lock the X-axis. The trackball addresses Y only.
Select the Y parameter. When active (LED on) the right vertical
wheel controls Tilt.
Locks the Y-axis. The trackball addresses X only.
Force selected spot parameter or channel to zero.
The Trackball controls the pan and tilt of the mirror. Trackball
resolution for 16-bit pan and tilt is adjustable in the System
Parameters menu or by using [FINE TUNING]
There are 6 wheels for Parameter and Effect attribute control. Each
wheel having 4 parameter assignments.
There are 2 vertical wheels. One for dimmer and pan and one for
iris and tilt.
B-11
Sabre
Advertisement
Table of Contents
