Adding A Spot; Adding Spot Parameters - Compulite Sabre User Manual

18-6 Modifying Palettes

Adding a spot

Example: Add a new spot type to Palette 10.
Keypresses
1. Select a spot type that is not in the
Palette.
2. Select a parameter and assign a
value.
3. Press [ASSIGN]
4. Press [PALETTE]
5. Press NSK [10]
Or
Keypresses
1. Press [PALETTE]
2. Press NSK [10]
3. Press [SPOT]
4. Select a spot type not included in
the Palette and assign values.
5. Press [STORE] again.

Adding spot parameters

The Palette modification sequence – [PALETTE] [NSK] [SPOT] modify [STORE] -
does not add parameters that are not already in the palette. To add new parameters to the
Palette use the following sequence.
Example: add a new parameter to Palette 10.
Keypresses
1. Press [PALETTE]
2. Press NSK [10]
3. Select the spot type and new
parameter.
4. Assign a parameter value.
5. Press [ENTER]
6. Press [ASSIGN]
7. Press NSK [10]
8. Press NSK [10]
Sabre
Results/Comments
Skip this step if the NSK mode is Palette
Palette # Stored is displayed.
Results/Comments
Skip this step if the NSK mode is Palette
The contents of the Palette are now in
the editor.
Palette # Stored is displayed.
Results/Comments
Skip this step if the NSK mode is Palette
The contents of the Palette are in the editor.
Update Palette Info? is displayed.
Palette # Stored is displayed.