Adding Text To A Display Macro; Using Display Macros - Compulite Sabre User Manual

3-8 Display Macros
Example: Program Display 9 using the numeric keypad.
Keypresses
1. Press [DISPLAY]
2. Enter 9 on the keypad.
3. Press [STORE]

Adding text to a Display Macro

Keypresses
1. Press [DISPLAY]
2. Press [TEXT]
3. Enter the display number on
the keypad.
4. Type the text on the keyboard
or use the NSKs in the Alpha
mode.
5. Press [STORE]

Using Display Macros

Example: Operate Display macro 25
Keypresses
1. Press [DISPLAY]
2. Enter 25 on the keypad
3. Press [ENTER]
Or
Keypresses
1. Press [DISPLAY]
2. Press [NSK 25]
Sabre
Results/Comments
Display is displayed in the command line.
The message Display 9 Stored is displayed.
The LED for NSK 09 is lit.
Results/Comments
The text appears in the command line.
The message Display # Stored is displayed.
Results/Comments
Display appears in the command line.
The monitor displays and LCD displays change
according to the set up in the Display macro.
Results/Comments
Skip this step if the NSK mode is Snap.
The monitor displays and LCD displays change
according to the set up in the Display macro.