Compulite Sabre User Manual page 382

30-12 Manually Assigning SMPTE Time
Example: Modify the time codes for memories 1 – 5 with a relative value of -4 seconds.
Keypresses
1. Select the memory range -
Æ Æ
[MEMORY 1 5]
2. Press [SMPTE]
3. Press [- ]
4. Press [•] [40]
5. Press [STORE]
The result of the example above is illustrated in the following table.
Memory Time In
1 4
2 4
3 4
4 4
5 4
Absolute modification
The first memory in the selection must have a time code assignment before using this
function.
The selected time is assigned to the first memory in the range. All of the memories in the
selected range that have SMPTE assignments are updated, calculated according to the
assignment to the first memory.
Example: Change the absolute assignment to the first memory to 30 seconds. Memories
with time code assignments are updated automatically. Memories without previous
assignments are ignored.
Keypresses
1. Select the memory range -
Æ Æ
[MEMORY 1 5]
2. Press [SMPTE]
3. Press [@]
4. Press [•] [30]
5. Press [STORE]
Sabre
Results/Comments
The time assignment for the first memory in
the range is displayed in the command line.
The SMPTE assignments are updated
relatively.
Previous SMPTE Modified SMPTE
assignment assignment
01:00:04.00 00:59:24.00
01:00:08.00 00:59:28.00
01:00:12.00 00:59:32.00
01:00:16.00 00:59:36.00
01:00:20.00 00:59:40.00
Results/Comments
The time assignment for the first memory in
the range is displayed in the command line.
The SMPTE assignments for memories that
already have SMPTE assignments are
updated.