Paging; Viewing The Nsks; Storing And Erasing - Compulite Sabre User Manual

Paging

Some of the modes contain only 2 pages and others many more.
To page modes that have only 2 pages, press [51-100].
This key toggles between page 1, where the first NSK is 1, and page 2, where the first
NSK is 51. Libraries, Snaps, Groups, and QLists contain only 2 pages because you cannot
program more than 100 items.
[UP] and [DOWN], located to the left of the NSKs, control the paging. Use them to page
through the NSKs in modes that can have more than 100 items; Macro mode, Spot mode,
Palette mode, Display Macro mode, and Effect Palette mode.
The LED Page display shows the first NSK number: 1, 51, 101, 151, etc.
The page is remembered when you exit an NSK mode. Example: In Macro Mode, the
NSKs access Macros 301 –350. When returning to Macro mode from another mode, the
NSKs are still on the 301 – 350 page.
The starting number for the current page is displayed on the top left of the Soft Key Exam.

Viewing the NSKs

You can view the NSKs on one of the monitors.
Press one of the [EXAM] keys and [51-100]. The contents of the NSKs and text
are displayed.

Storing and erasing

[ASSIGN] is used to store Snaps, Libraries, Groups, Palettes, Display Macros, and Effect
Palettes.
[FREE] is used to erase Snaps, Libraries, Groups, Palettes, Display Macros, and Effect
Palettes.
Example: Store library 1.
Keypresses
1. Select spots and move the
beam to the desired position.
2. Press [ASSIGN]
3. Press the library category.
4. Press NSK [01]
Numeric Soft Keys
Results/Comments
The LED for NSK 01 is on. The message
Library 01 Stored is displayed.
2-5
Sabre