Table of Contents
Advertisement
Keypresses
7. Press [MEMORY] [70 → 80]
8. Press [DIM] or [XF] for
controller assignment.
9. Press the controller's [DIM]
key.
10. Press F1 Store Macro
Modifying Macros
Modify Macros by deleting an erroneous entry or inserting a new entry.
New entries are inserted in front of the cursor.
The instructions below show deletion of an error.
Keypresses
1. Press F3 Modify
2. Enter the Macro number in
response to the prompt.
3. Use the arrows to position the
cursor over the error.
4. Press [CE]
5. Insert the correct keypress
6. Press F1 Store Macro
Linking Macros
A Macro may be linked to another Macro. Linked Macros operate with a single keypress.
Linked Macros must be the last entry in a Macro sequence.
Example: Macro 12 is linked to Macro 50.
Keypresses
1. Press F1 Create
2. Press F6 Macro #
3. Execute desired keystrokes
4. Press F5 Macro #
5. Enter the Macro number on
the keypad.
6. Press F1 Store
The Macro Menu
Results/Comments
Select the memory range for assignment.
This is the Go command.
Pressing F1 operates the sequence described
above.
Results/Comments
Sabre prompts for a Macro number.
A window containing the selected Macro
opens.
The erroneous entry is erased.
Results/Comments
Enter the new Macro number on the keypad.
In this case, 050.
Remember! Up to 40 keystrokes are allowed.
Leave room for the linked Macro.
This option permits linking a Macro.
Store Macro 50.
22-3
Sabre
Advertisement
Table of Contents
