Assigning Smpte Codes To Events - Compulite Sabre User Manual

30-14 Manually Assigning SMPTE Time
Using a decreasing delta
Example: Apply a decreasing delta of 2 seconds.
Keypresses
6. Select the memory range - Æ Æ
[MEMORY 1 5]
7. Press [SMPTE]
8. Press [-] [-]
9. Press [•] [2]
10. Press [STORE]
The result of the example above is illustrated in the following table.
Memory Time Original SMPTE
In assignment
1 4 00:00:04.00
2 4 00:00:08.00
3 4 00:00:12.00
4 4 00:00:16.00
5 4 00:00:20.00

Assigning SMPTE codes to Events

The procedures for assigning SMPTE time to Events are identical to that of memories. Use
the sequences described above, substituting [EVENT] for [MEMORY].
There is one exception. When assigning an absolute time, all of the Events receive the
same time assignment. Example: Assign SMPTE time 1 hour and 35 minutes.
Keypresses
Æ
1. Select Events 1
2. Press [SMPTE]
3. Enter [1] [•] [35] [•] [0] on the
keypad.
4. Press [STORE]
Sabre
Results/Comments
The time assignment for the first memory in
the range is displayed in the command line.
The SMPTE assignments are updated.
Modified SMPTE
assignment
00:00:04.00
00:00:06.00
00:00:08.00
00:00:10.00
00:00:12.00
Results/Comments
5.
The SMPTE time for Events 1
01:35:00:00.
Modified by
-0
-2
-4
-6
-8
Æ
5 is