Table of Contents
Advertisement
26-10
System Parameters
Parameter
WYSIWYG device #
Serial COM 1|COM 2
Latest Takes Precedence
Time of day
Date
Store tracking if dim on
Scrollers jump on fade
Mix editing of spots
Auto assignment on GO
Compress disks
A/B in snap
Autosave # of generations
Store increment
Jump display
Sabre
What it does
If you are using WYSIWYG, set the device number and
toggle to active. This requires a numeric entry and a toggle.
Define COM 1 and COM 2 for the Touch or the PC Serial
Interface.
Toggle to enable or disable the LTP control priority.
Sets the system's real time clock. Requires a numeric entry.
Set the date. Requires a numeric entry.
When toggled to Yes: If the dimmer is more than 0% all of
the spot parameters are recorded to memory even though
some of the parameters have not been selected.
When toggled to No: Only the parameters present in the
editor are recorded to memory.
There is a dedicated key on the console to enable or disable
this function, regardless of the setting in this menu.
Determine the behavior of scrollers during a crossfade.
They can jump or fade. This is a toggle.
Determines whether spots of different types are included
when selecting a range of spots or if only one type of spot in
the selected range is entered to the editor. This is a toggle.
Determines the behavior of assignments through Events.
Example: the Event in memory 20 is; assign memories 5 - 8
to C/D auto start. When set to No, the assignment to C/D
occurs when the crossfade to memory 19 is complete. When
set to Yes, the assignment occurs when [GO] is pressed,
initiating the crossfade to the memory 20. This is a toggle.
Determines whether show data is automatically compressed
when recording show files. If set to yes, this allows
recording 2Mb of show data to a 1.44 Mb diskette. This is a
toggle.
Determines whether the snap affects A/B assignments. This
is a toggle.
Activates the Autosave and determines how many
generations of files generated by the Autosave function are
retained in the system. Number entries 1 - 8. Disables the
Autosave function.
Change the automatic increment when +STORE is pressed.
Enter any number. Example: if you have changed the
increment to 5, pressing +STORE, when the last memory
stored was 100, stores the current editor group as memory
105
When toggled to "no jump", the spot display behaves as
usual.
When toggled to "auto jump" the spot display automatically
jumps to the page with the selected spot.
If more than one spot is selected the display jumps to the
page where the highest selected spot is displayed. The auto
jump option can be set for either CRT 1 or CRT 2.
Advertisement
Table of Contents
